PT - JOURNAL ARTICLE AU - MICA, MICHAEL CONTI AU - VORONOV, LEONARD I. AU - CARANDANG, GERARD AU - HAVEY, ROBERT M. AU - WOJEWNIK, BARTOSZ AU - PATWARDHAN, AVINASH G. TI - Biomechanics of an Expandable Lumbar Interbody Fusion Cage Deployed Through Transforaminal Approach AID - 10.14444/5063 DP - 2018 Aug 01 TA - International Journal of Spine Surgery PG - 520--527 VI - 12 IP - 4 4099 - https://www.ijssurgery.com/content/12/4/520.short 4100 - https://www.ijssurgery.com/content/12/4/520.full SO - Int J Spine Surg2018 Aug 01; 12 AB - Background: A novel expandable lumbar interbody fusion cage has been developed which allows for a broad endplate footprint similar to an anterior lumbar interbody fusion; however, it is deployed from a minimally invasive transforaminal unilateral approach. The perceived benefit is a stable circumferential fusion from a single approach that maintains the anterior tension band of the anterior longitudinal ligament. The purpose of this biomechanics laboratory study was to evaluate the biomechanical stability of an expandable lumbar interbody cage inserted using a transforaminal approach and deployed in situ compared to a traditional lumbar interbody cage inserted using an anterior approach (control device). Methods: Twelve cadaveric spine specimens (L1-5) were tested intact and after implantation of both the control and experimental devices in 2 (L2-3 and L3-4) segments of each specimen; the assignments of the control and experimental devices to these segments were alternated. Effect of supplemental pedicle screw-rod stabilization was also assessed. Moments were applied to the specimens in flexionextension (FE), lateral bending (LB), and axial rotation (AR). The effect of physiologic preload on construct stability was evaluated in FE. Segmental motions were measured using an optoelectronic motion measurement system.Results: The deployable expendable transforaminal lumbar interbody fusion (TLIF) cage and control devices significantly reduced FE motion with and without compressive preload when compared to the intact condition (P < .05). Segmental motions in LB and AR were also significantly reduced with both devices (P < .05). Under no preload, the deployable expendable TLIF cage construct resulted in significantly smaller FE motion compared to the control cage construct (P < .01). Under all other testing modes (FE under 400N preload, LB, and AR), the postoperative motions of the 2 constructs did not differ statistically (P > .05). Adding bilateral pedicle screws resulted in further reduction of range of motion for all loading modes compared to intact condition, with no statistical difference between the 2 constructs (P > .05).Conclusions: The ability of the deployable expendable interbody cage in reducing segmental motions was equivalent to the control cage when used as a standalone construct and also when supplemented with bilateral pedicle screw-rod instrumentation. The larger footprint of the fully deployed TLIF cage combined with preservation of the anterior soft-tissue tension band may provide a better biomechanical fusion environment by combining the advantages of the traditional anterior lumbar interbody fusion and TLIF approaches.